QSC
QSC K10 2-Way Active Loud Speaker (Pair)
Features
- 10” Woofer; 1.75” diaphragm compression driver
- 90° conical DMT coverage
- Maximum SPL 129 dB peak
- Attractive and professional appearance
- Rugged ABS enclosures
- 16-gauge powder coated steel grille
- 1000-watt continuous Class D power modules in all models
- Functions as a monitor wedge
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eyebolt and yoke mount accessories available
- Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP enhances system performance:
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
| SPECIFICATIONS | K10 |
| Configuration | Multipurpose 2-way |
| Transducers Low-frequency High-frequency |
10" cone transducer 1.75" diaphragm compression driver |
| Frequency Response (-6 dB) | 60 Hz - 18 kHz |
| Frequency Range (-10 dB) | 56 Hz - 20 kHz |
| Nominal Coverage (-6 dB) | 90° conical DMT |
| Maximum SPL1 | 129 dB peak |
| Amplifiers | |
| Power Output2 |
1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
| Input Impedance |
XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced XLR / ¼" MIC mode: 2260Ω balanced RCA: 10 kΩ |
| Controls | Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors | Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling | On demand, 50 mm variable speed fan |
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection | Thermal limiting, excursion limiting |
| AC Power Input | Universal power supply 100–240 VAC, 50 to 60 Hz |
| AC Power Consumption (1/8 of full power) |
100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A |
| Enclosure | |
| Material | Impact resistant ABS |
| Finish | Black paint |
| Grille | Rugged powder-coated steel |
| Dimensions (HWD) inches | 20.4 × 12.6 × 11.8 |
| Dimensions (HWD) mm | 519 x 320 x 300 |
| Weight (Net) | 32 lb / 14.5 kg |
| Available Accessories | K10 Tote, K10 Yoke, M10 Kit-C |
